|
WES30 Controller
The control of the WES30 is based on a Industrial PC or IPC. This IPC
based system acts like a PLC and has I/O modules in the control cabinet
and a remote I/O unit in the nacelle.
All sensors in the
nacelle, switches, relays and the converter are wired to the I/O
modules in the control cabinet. The IPC also runs an internal Ethernet
LAN which connects the IPC to the I/O modules, the converter and the
local control panel.
The control panel is located on the control
cabinet door for friendly user interface. The screen shows the actual
wind speed, wind direction, rotor-speed and the generated power. It
also provides the cumulative kWh production and the historical data.
Using the buttons on the control panel, parameters controlling the
behaviour of the system can be changed. Some of these parameters can be
set remotely over the Internet as well.
The controller and the
electrical system are 'fail-safe' designed, which means that in case of
a failure the turbine goes in a safe position.
The IPC logs detailed
information about any failure. WES30 turbines are connected to the
Internet. System log files, status reports, wind speed, the actual and
cumulated performance can be monitored remotely. Each turbine can have
its own URL, login and password and can be reached through any
Internet browser.
|
|
|
|
User friendly control panel. |
|
|
Wind speed overview. |
|
|
|
